Hardware Specifications
Power Requirements: | :+5VDC (max. 100mA, typical 70mA, 50mV peak to peak max ripple) |
Operating Temperature: | 0 to 50 degrees Centigrade |
Storage Temperature: | :-40 to 80 degrees Centigrade |
Relative Humidity: | 95% at 60 degrees Centigrade |
Protocol: | 1. RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit |
2. USB: USB 1.1 Low speed | |
3. PS2: PS2 mouse | |
Resolution: | 2048 x 2048 |
Accuracy Tolerance: | Max. +/- 0.5% tolerance |
Report Rate: | 1. RS232: Max. 160 points/sec |
2. USB: Max. 160 points/sec | |
3. PS2: Max. 140 points/sec | |
Response Time: | Max. 35 ms |
Regulatory Approvals: | FCC-B, CE |
Pin Out Definition: | UL, UR, COM, LR, LL/UL. UR, COM, LL, LR |
Panel Resistance: | 50 ~ 200 ohm (pin to pin on the same layer, touch under 1.2k ohm) |
Software Features
Calibration: | Fast Full oriental 4 points position) |
Compensation: | 1. Accuracy 25 points linearity position |
2. Edge compensation | |
Draw Test: | Position and linearity verification |
Protocol: | Support 10 languages for Windows |
Controller Setting: | 1. Support multiple controllers |
2. Dynamical add/ remove controllers | |
3. Change controller interface without reboot | |
Mouse Emulator: | 1. Right/ left button emulation |
2. Click/ drawing mode | |
Double Click: | 1. Configurable double click speed |
2. Configurable double click area | |
Sound Notification: | 1. No sound |
2. Touch down | |
3. Touch up | |
OS Support: | Windows 95, 98, ME, NT4/ 2000/ XP/ XP Tablet PC edition,Windows CE 2.12/ 3.0/ .net/ 5.0,Linux (up to Kernel 2.6) |
MS-DOS: | support display resolution: 320x200, 640x200, 640x350, 640x480, 800x600, 1024x768 and 1280x1024,iMac 9.0/ OS X |
COM Port Support: | 1. Support COM1~COM256 for Windows and Linux |
2. Support COM1~COM8 for DOS | |
Display Support: | 1. Support monitor/ display rotation |
2. Support multiple monitors | |
3. Support split monitor |
Diagrams: