气囊整平封口机_其他类设备_产品展示_中国电子科技集团公司第二研究所_原材料及设备厂商

气囊整平封口机

气囊整平封口机 Leveling－sealing machine

LCD整平封口工序是液晶显示器件制造中后段工序的重要一环，通过对玻盒表面施压，来消除由于前工序LCD玻盒在制盒灌液工序过程中，由于多种因素的影响而使LCD玻盒厚度均匀性不一致，从而造成透光度不均匀的缺陷。此设备能使玻盒厚度在整体上一致、均匀，以提高产品质量。

多工位气囊加压整平封口机，具有结构紧凑、操作方便、使用可靠安全，自动化程度高等优点，其设备成本相对较低，由于此优越的性能价格比，选择多工位气囊加压整平封口机是非常经济适用的。

LCD leveling and sealing procedure is a later process of the LCD manufacturing, it can remove the inconformity of the LCD glass box thickness homogeneity caused by the various elements, which can result in the deficiency of the transparency unevenness in the box making filling process of LCD glass box during the preprocess. This equipment can ensure the overall conformity and evenness of the glass box thickness thus to improve the product quality.

Multi-station gas leveling and sealing machine has such advantages as compact structure, easy to operate, safety and reliability, high-degree automation. The cost of the machine is much lower, so it is a wise choice to use this type of machine.

设备型号Type	QZF-3	QZF-4
玻盒规格(mm) Glass box specification	355.6*406.4	460*200
层数（可定制） Layer (can be customized)	3层 3	5层 5
工位（可定制）Station (can be customized)	三工位 3 stations	四工位 4 stations
玻盒取放方式 Picking and placing method for glass box	手动取出，手动放入 Pick out automatically and put it in place manually.	手动取出，手动放入 Pick out automatically and put it in place manually.
整平座翻转 Overturning of the leveling foot	自动 Automatic	自动/手动 Automatic/ manual
整平座平移Translation of leveling foot		自动/手动 Automatic/ manual
UV固化灯移动 UV curing light movement	Automatic	自动，灯的扫描速度在0-3（m/min）范围内可无极调整灯管垂直于玻璃封口方向运行，使各点曝光更均匀。 For the automatic condition, within the light scanning speed of 0-3（m/min）the modulator tube can be adjusted indefinitely to move vertically to the glass sealing direction, so as to make the exposure of all points more even.
加压方式 Pressurization method	通过气囊对LCD玻盒进行施压 Pressurization can be conducted to LCD glass box through gas bag.	通过气囊对LCD玻盒进行施压 Pressurization can be conducted to LCD glass box through gas bag.
真空系统 Vacuum system	加压点胶结束后抽气，使气囊卸压，以便利LCD玻盒的取放 Air extraction can be conducted after pressurization dispensing so as to release the pressure and be easy for placing the LCD glass box.	加压点胶结束后抽气，使气囊卸压，以便利LCD玻盒的取放 Air extraction can be conducted after pressurization dispensing so as to release the pressure and be easy for placing the LCD glass box.
动力配置 Power	三相 AC 380V Three -phase AC 380V	三相 AC 380V Three- phase AC 380V
外形尺寸(mm) Boundary dimension	260013501900	230017001900

可根据客户要求订制 The machine can be made according to the customer’s requirements