液晶玻璃研磨机Liquid crystal glass grinding machine
玻璃研磨机主要用于对表面划伤的液晶玻璃进行研磨修复,机器主要由上、下工作台部件,研磨液供给机构,电气柜、控制盒和废液分离器等几部分构成,该机器玻璃的上下料需通过人工手动完成。上工作台的上下和旋转运动分别通过气缸和调速电机驱动完成,下工作台是通过调速电机带动变速箱驱动工作台旋转。机器的所有的标准件如导轨、轴承、电机、减速器、电气元器件等均选用进口产品,保证了研磨机的精度和稳定性.
Glass grinding machine is mainly used for grinding and repairing the liquid glass with surface scratched. The machine consists of the upper and lower workbench components. Grinding fluid feeding mechanism consists of the electrical cabinet, control box and liquid waste separator and others. The loading and unloaing of materials can be completed manually. The moving forward and downward and the rotation of the upper workbench can be completed by the air cylinder and the driving of the adjustable-speed motor. The rotation of lower workbench can be completed by the adjustable motor driving the gearbox. The standard pieces such as guide rail, bearing, motor, reducer and electrical components and others are selected from the imported products, thus ensuring the precision and stability of the grinding machine.
设备型号 Type |
YM-600 |
YM-950 |
研磨玻璃尺寸(mm) Glass size |
Max 400*450 |
Max 650*650 |
工件定位Workpiece alignment |
特制工装 Special mold alignment |
特制工装Special mold alignment |
研磨时间Grinding time |
可调(在研磨时间范围内正反转时间可任意设定) |
可调(在研磨时间范围内正反转时间可任意设定) |
水源 Water source |
水管 DN15 |
水管 DN15 |
气源 Gas source |
0.5MPa – 0.7MPa |
0.5MPa – 0.7MPa |
动力配置 Power |
三相 AC 380V Three- phase AC 380V |
三相 AC 380V Three- phase AC 380V |
外形尺寸(mm) |
2150*1590*2011 |
2450*1590*2011 |
可根据客户要求订制 The machine can be made according to the customer’s requirements