Hardware Specifications
Power Requirements：+5VDC (max. 100mA, typical 70mA, 50mV peak to peak max ripple)
Operating Temperature：0 to 50 degrees Centigrade
Storage Temperature：-40 to 80 degrees Centigrade
Relative Humidity：95% at 60 degrees Centigrade
Protocol：1. RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit
2. USB: USB 1.1 Low speed
3. PS2: PS2 mouse
Resolution：2048 x 2048
Accuracy Tolerance: Max. +/- 0.5% tolerance
Report Rate: 1. RS232: Max. 160 points/sec
2. USB: Max. 160 points/sec
3. PS2: Max. 140 points/sec
Response Time: Max. 35 ms
Regulatory Approvals: FCC-B, CE
Pin Out Definition: UL, UR, COM, LR, LL/UL. UR, COM, LL, LR
Panel Resistance: 50 ~ 200 ohm (pin to pin on the same layer, touch under 1.2k ohm)
Software Features
Calibration: Fast Full oriental 4 points position
Compensation: 1. Accuracy 25 points linearity position
2. Edge compensation
Draw Test: Position and linearity verification
Controller Setting: 1. Support multiple controllers
2. Dynamical add/ remove controllers
3. Change controller interface without reboot
Languages: Support 10 languages for Windows
Mouse Emulator: 1. Right/ left button emulation
2. Click/ drawing mode
Sound Notification: 1. No sound
2. Touch down
3. Touch up
Double Click: 1. Configurable double click speed
2. Configurable double click area
OS Support: Windows 95, 98, ME, NT4/ 2000/ XP/ XP Tablet PC edition
Windows CE 2.12/ 3.0/ .net/ 5.0
Linux (up to Kernel 2.6)
MS-DOS: support display resolution: 320x200, 640x200,
640x350, 640x480, 800x600, 1024x768 and 1280x1024
iMac 9.0/ OS X
COM Port Support: 1. Support COM1~COM256 for Windows and Linux
2. Support COM1~COM8 for DOS
Display Support: 1. Support monitor/ display rotation
2. Support multiple monitors
3. Support split monitor
| |
全国触摸屏销售热线：（点击查看）
广 州 020-87599875
